The ECI 6 MKII is a powerful integrated amplifier, equipped with 4 analog inputs. The new ECI 6 offers 2 x 125 watts and is based on the successful ECI 5 MK II. To improve it, we have equipped the ECI-6 with an even better power supply and a more sophisticated preamp module. As a result, we can offer you an extremely substantial and dynamic amplifier, capable of driving a wide range of speakers on the market. Analog sources can be connected to one balanced input (XLR) and three single ended stereo inputs (RCA). With two preamp outputs, one balanced and one single ended, it makes the ECI-6 ready for future expansion. The input stage is built from discrete circuits operating in class A with zero feedback. The output stage operates with moderate amounts of negative feedback, carefully balanced between good bass extension and control, a detailed open midrange, and a warm, detailed top. Everything for the ECI 6 to play your favorite music as it was recorded. The ECI 6 is upgradeable to ECI 6D and ECI 6DX.
All measurements are made at 120V / 240V // 50Hz / 60Hz.
Preamp section.
Input impedance (Balanced input) 47Kohm.
Maximum input level 10 Volts RMS.
Noise floor (1Vrms, 20 - 20 kHz, balanced).
135 dB
THD + N (1Vrms, 20 - 20 kHz, balanced) <0.004%.
Gain (Balanced) 0 dB
Amplifier section.
Output impedance <0.02 Ohm
Frequency response 1 - 150 kHz
Channel separation> 120 dB
THD (20 - 20 kHz) <0.004%.
Maximum peak current> 100A
Damping factor 8 ohms load> 350
I Input sensitivity 120W output 1.3Vrms
HT input sensitivity 120W output 1Vrms
HT Input Gain x36 (31 dB)
Rated output power
8 ohms 2 x 125 W
4 ohms 2 x 200 W
2 ohms 2 x 370 W
Energy consumption
110 W
Standby 1W.
(no load or signal)
Dimensions.
Dimensions (W x H x D): 470 x 128 x 430mm
Weight: 20.5 Kg.
