EAT E-Glo S
Hybrid phono preamp that uses ECC83 (double triode) tubes in the first and second gain stage. To obtain higher gain and lower noise, we used in the first stage a tube cascade connection with two low noise J-FET transistors connected in parallel.
bloques info producto
Bank Transfer (3% OFF)
If you make the payment via bank transfer, you will receive an extra 3% discount on your order.
For personalized advice, contact us with no obligation
Need to upgrade your equipment?
Would you be interested in trading in a device when purchasing this item?
The RIAA curve is fully passive equalized and divided into two steps, allowing a perfect impedance match between the gain stage and the equalization block. The phono preamp does not have any global feedback. It has a solid aluminum chassis, with great possibility of impedance, capacity and gain adjustment. It has a subsonic filter with a soft effect that does not affect audible frequencies in an unpleasant way.
A very important part is the advanced power supply which uses anode voltage regulation and well filtered voltage. Filtering is done in three steps, this result is a perfect S / N ratio and an uninterrupted music experience.
Technical characteristics:
Input impedance mc 10,25,50,75,100,1000 ohm
Load capacity 50,100,150,150,200,270,320,420 pf
Output impedance 100 ohms
Load capacity 50,100,150,150,200,270,320,420 pf
Gain mm 45 db
Gain mc 45.50.55.65.70 db
Riaa accuracy between 0.5db / 20hz - 20khz
Subsonic 18 db / octave
Input rca
Output rca
DC18V / 1 power supply
Dimensions w × h × d 435 × 90 × 270 mm