Shopping Cart
There are no more items in your cart
MUSICAL FIDELITY M2SI + M2SCD + LUMINA I
MUSICAL FIDELITY M2SI + M2SCD + LUMINA I. Audio Pack
bloques info producto
Bank Transfer (3% OFF)
If you make the payment via bank transfer, you will receive an extra 3% discount on your order.
Need to upgrade your equipment?
Would you be interested in trading in a device when purchasing this item?
The M2si is a high-quality integrated amplifier at a low price + The M2scd is a high-quality CD player with excellent sound + Sonus-Faber LUMINA I front-ported 2-way / 2-speaker bass-reflex system
Musical Fidelity M2SI
Power 60 watts per channel into 8 ohms (18dBW).
Voltage 22 volts RMS, 20 Hz to 20 kHz; start of trimming.
62 volts peak to peak.
25 amp peak-to-peak current.
Damping factor 36.
Output devices 1 pair per channel.
Line input.
THD + N <0.014% typical, 20Hz to 20kHz.
Signal to noise ratio> 96dB 'A-weighted'.
Input impedance 40 k Ohms.
Frequency response +0, -0.1dB, 10Hz to 20 kHz.
Connections.
Line level inputs 6 pairs of line level RCA connectors.
Line level outputs 1 pair of line level RCA connectors, constant level TAPE outputs.
1 pair of RCA line level connectors, pre-amp outputs for eg bi-amping.
Speaker outputs 2 pairs of 4mm banana plugs.
Power requirements.
Mains voltages 115 / 230VAC 50 / 60Hz (factory preset).
100VAC 50 / 60Hz (alternative)
Maximum consumption of 320 watts.
Weight.
Unit only, unboxed 9.2 kg (20¼ lbs).
In cardboard boxes of 13 kg (30⅔ lbs).
Dimensions.
Width 440 mm (17⅓ ").
Height, including feet 100 mm (4 ").
Depth (front to back) including 400mm (15¾ ") terminals.
Musical Fidelity M2SCD
Departure
Output impedance: 50 ohms
Output, 0 dB digital level: RCA output - 2.2V r.m.s. nominal
CAD
DAC Circuit: Delta-Sigma 24-bit (Bitstream) Double Differential 8x Oversampling
Correlated total jitter: <135 picoseconds peak-to-peak
Linearity: <0.1dB to -96dB
Frequency response: 10Hz to 20 kHz -0.2dB max.
Channel Separation:> 105dB 20Hz to 20kHz
Signal to noise ratio:> 117dB "a" - wtd.
Total Harmonic Distortion: <0.003% 10Hz to 20kHz
Connections
Line level outputs: 1 pair of line level RCA connectors, left and right outputs
Digital outputs: 1 RCA SPDIF coaxial connector, 1 TOSLINK optical connector
Required power
Mains voltages 115 / 230VAC 50 / 60Hz (factory preset)
100VAC 50 / 60Hz (alternative)
Consumption 20 Watts maximum
Weight
Unit only, unpackaged 6.65 kg (14⅔ lbs)
In cardboard boxes of 10.5 kg (23 lbs)
Dimensions
Width 440 mm (17⅓ ")
Height, including feet 100 mm (4 ")
Depth (front to back) including 375mm (14¾ ") terminals
Sonus Faber LUMINA I
• Compact monitor with high performance and exceptional quality / price ratio.
• 2-way / 2-speaker bass-reflex system with front port.
• 29mm textile dome tweeter with D.A.D. by Sonus Faber.
• 120mm mid / bass loudspeaker with multi-fiber composite cone.
• Square enclosure to enhance balance between form and function.
• Crossover filter with exclusive Sonus Faber topology.
• High versatility High Fidelity / Home Cinema.
• Two sets of connection terminals for bi-wiring / bi-amping.
• 65-24,000 Hz frequency response.
• Sensitivity of 84 dB / W / m.
• Nominal impedance of 4 ohms.
• Amplification power between 30 and 100 W RMS.
• Built entirely by hand in Italy.
• Dimensions: 148x280x213 mm (W x H x D).
• Weight: 4.4 kg.
16 other products in the same category:
- -€689.00
- -€489.00
- -€799.00
- -€560.00
- -€790.00
- -€599.00
- -€1,098.00
- -€440.00
- -€690.00
- -€639.00
- -€428.00
- -€448.00
- -€490.00
- -€490.00
Tap to zoom
